- Home
- Help - How to Get
- Lab Schedules & Planning
- Submit a Ticket
- 3D Printing Request
- Poster Printing Main Page
- Instructional Lab Descriptions
- Fees and Charges
- Instructional Lab Committee
- Fab Lab Access, BE-138
- Instructional Optics & Laser Lab, BE-148
- Microcontroller Development Kit Information
- Stock Room
- BELS Lab Support for Recharge
GabrielEmailAugEight
-- BobVitale? - 06 Aug 2004
> -----Original Message-----
> From: Gabriel Hugh Elkaim [mailto:elkaim@soe.ucsc.edu]
> Sent: Thursday, August 05, 2004 3:40 PM
> To: rvitale@soe.ucsc.edu
> Cc: Dan Merson; Julie Shapiro; David Meek; Richard Hughey; Pat Guevara
> Subject: Re: CMPE118/L Mechantronics
>
>
> Hi Bob,
>
> We most definitely need a hardware lab for this course. It will also need
> to be one where the students can have access to it over nights and
> weekends. Basic requirements are going to be:
>
> Oscilloscopes (2Ch+, 100KHz+)
> Bench Power Supplies
> PC's with schematic capture and other software (TBD)
> A few solder stations (doesn't need to be that many)
>
> They will also need a lab kit with a prototyping board, some basic chips
> and an HC11 kit. This will become more defined later as the
> course gets closer.
>
> --Gabriel
>
>
> At 03:32 PM 8/5/2004, Bob Vitale wrote:
> >Prof Elkaim,
> >
> >I just notice a new course with a lab designator ('L') added to
> the Spring
> >2005 schedule.
> >CMPE118/L Intro to Mechantronics.
> >
> >Will you be requiring use of a hardware lab for this course (e.g. a BELS
> >lab) or will you be scheduling use of a CATS IC (Campus General Purpose
> >Computer) lab.
> >
> >If you do intend to use a BELS lab, we will need to know your
> requirements.
> >For Spring all of our labs are presently booked with at least one course,
> >some with two.
> >You can see the lab schedule at:
> >
> >http://wiki.soe.ucsc.edu/bin/view/BELS/BELSLabSchedule0405
> >
> >thanks, Bob
>
> ==========================================
> Gabriel H. Elkaim
> Assistant Professor
> Computer Engineering Department
> University of California at Santa Cruz
> 1156 High Street, Santa Cruz, CA 95064
> 831.459.3054 (Office) 831.459.4829 (Fax)
> www.soe.ucsc.edu/~elkaim
>
-- MatthewKalastro? - 21 May 2004
> From: Gabriel Hugh Elkaim [mailto:elkaim@soe.ucsc.edu]
> Sent: Thursday, August 05, 2004 3:40 PM
> To: rvitale@soe.ucsc.edu
> Cc: Dan Merson; Julie Shapiro; David Meek; Richard Hughey; Pat Guevara
> Subject: Re: CMPE118/L Mechantronics
>
>
> Hi Bob,
>
> We most definitely need a hardware lab for this course. It will also need
> to be one where the students can have access to it over nights and
> weekends. Basic requirements are going to be:
>
> Oscilloscopes (2Ch+, 100KHz+)
> Bench Power Supplies
> PC's with schematic capture and other software (TBD)
> A few solder stations (doesn't need to be that many)
>
> They will also need a lab kit with a prototyping board, some basic chips
> and an HC11 kit. This will become more defined later as the
> course gets closer.
>
> --Gabriel
>
>
> At 03:32 PM 8/5/2004, Bob Vitale wrote:
> >Prof Elkaim,
> >
> >I just notice a new course with a lab designator ('L') added to
> the Spring
> >2005 schedule.
> >CMPE118/L Intro to Mechantronics.
> >
> >Will you be requiring use of a hardware lab for this course (e.g. a BELS
> >lab) or will you be scheduling use of a CATS IC (Campus General Purpose
> >Computer) lab.
> >
> >If you do intend to use a BELS lab, we will need to know your
> requirements.
> >For Spring all of our labs are presently booked with at least one course,
> >some with two.
> >You can see the lab schedule at:
> >
> >http://wiki.soe.ucsc.edu/bin/view/BELS/BELSLabSchedule0405
> >
> >thanks, Bob
>
> ==========================================
> Gabriel H. Elkaim
> Assistant Professor
> Computer Engineering Department
> University of California at Santa Cruz
> 1156 High Street, Santa Cruz, CA 95064
> 831.459.3054 (Office) 831.459.4829 (Fax)
> www.soe.ucsc.edu/~elkaim
>
====================================== -- MatthewKalastro? - 21 May 2004